STOP LOSSING with NEUTRON SMART TAG
Neutron Smart Tag is an object tracking device. It has a small, light and stylish design and allows you to keep track of your belongings with the "Find" application on your device using Bluetooth technology.
Find Your Stuff Easily!
Neutron Smart Tag interacts with other devices in the environment and informs you where your belongings are and how you can find them.
Neutron Smart Tag is a Bluetooth Low Energy (BLE) device used to track objects. Keep your belongings, car, keys, etc. helps you keep track. You can connect Neutron Smart Tag to your devices through the "Find" application and view where your belongings are.
There are many features that define Neutron Smart Tag:
- Small and lightweight: allows you to easily carry your belongings anywhere.
- Easy to use: can be easily used via the "Find" application on your device.
- Secure tracking: helps you make sure your belongings are always with you.
- Precise tracking: tracks where your belongings are very precisely.
Installation;
- Turn on the device and pair it
- Press and slide down the battery compartment, remove the insulation sheet and put the batter back.
- Press and hold the button for 3 seconds, the device will beep and enter the pairing state
- Pair the device
- Open The Find My app.
- Hold the device close to your iPhone and iPad, tap the Items tab, tap +, then tap Add Another Item.
- Tap Connect.
- Type a name for your device, choose an emoji.
- Tap Accept to accept that this item will be linked to your ID.
- Tap finish
Enable Lost Mode
- Open The Find My app, tap the Items tab, then tap your item.
- Under Lost Mode, tap Enable.
- Read the instructions, tap Continue, and enter a phone number or email address.
- Confirm the information, customize the lost message, and tap Activate to complete the setup.
Main Functions
1. Turn on and pair the device
- Press and slide down the battery compartment, remove the insulation sheet and put the batter back.
- Press and hold the button for 3 seconds, the device will beep and enter the pairing state.
2. Find your item
- If your lost item isn't nearby, Find My App is available on hundreds of millions of iPhone, iPad and Mac devices worldwide.
- It can still help you track it down using Find My network.
- Nearby devices can safely locate your lost device.
- It sends it to iCloud, then you can see where it is in the Find My app.
- All are anonymous and encrypted to protect everyone's privacy.
3. Play Audio
- Open Find My App, tap the Items tab, then tap your item.
- When you click Play Sound the device will beep so you can find the item easily
Instructions for device button
1. Matching Status
- After installing the battery,
- Long press the button for 3 seconds,
- The device will beep,
- The light will flash three times and the device will enter the pairing state.
2. Re-pair the device
- After removing the device from the App, it will not turn off and will be in pairing mode.
- If there is no re-pairing within 10 minutes, the device will exit the pairing state.
- If you currently want to pair a device,
- You need to hold the button for 3 seconds,
- The device will beep and enter the pairing state.
- At this time, the device enters the pairing state and can be paired again with the Find My app.
3. Factory settings
When the smart tag needs to be paired with a new account or the original account removes the smart tag in the “Find” App, the smart tag is not next to the phone where the original account is located. In this case, the smart tag must be reset.
The steps are as follows:
- After removing the device from the Find My app,
- until the device beeps once.
- Long press the button of the device for about 12 seconds.
- Then immediately double-click the device's button twice and the device will beep twice,
- Finally, release the button.
Frequently Asked Questions
1.When can the device be available?
When an item is separated from its owner for a certain period of time, it can be found by other devices that are part of the Find My network and the owner can begin to retrieve the device's location.
2.How is the device designed to prevent unwanted tracking?
If any Find My Network accessory that has become separated from its owner is seen moving with you, you will be notified in one of two ways
If you have an iPhone or iPad, the Find My network sends a notification to your device. This feature is available on iOS or iPadOS 14.5 or later.
If you do not have an iOS device or smartphone, the Find My network accessory that has not been with its owner for a while will make a sound when moved. These features are specifically created to prevent people from trying to track you without your knowledge.
3.How is my privacy protected?
Only you can see where your item is located. Your location data and history are never stored on the item itself. The devices that transmit your item's location also remain anonymous, and that location data is encrypted every step of the way. So or even Neutron does not know the location of your device or the identity of the device that helps you find it.
4. How to replace the battery?
- Press and slide down the battery compartment.
- Replace the battery with a new one. (Positive pole up).
- Mount the device.
5. How to disable Find My network?
- Open the battery cover on the back of the Neutron Smart Tag by pressing down and sliding it out.
- Remove the battery.
FeaturesEnergy ManagementBluetoothYesBattery TypeCR2032Product ColorWhiteNumber of BatteriesSupported1Near Field CommunicationYesPackage ContentsInternational Protection CodeIP67Package Contents1Recessed SpeakersYesUser ManualYesSpeedometerYesBattery IncludedYesBounce AdjustmentYesWeight and DimensionsWater ResistantYesDiameter3,19 cmTo Time ResistantYesHeight8 mmMobile Working Systems SupportedIOS 14.5Weight11 gEnergy ManagementRechargeableNo
This product Sent by the seller Doğansan.
The price of the product you have examined is determined by the seller.
Become a Seller/Service Provider
Solution Center
0850 309 51 23
.png){kind=logo}
The unit of all measurements is CM.
