Your Cart

İstaBreeze 2000 Watt 48 Volt Protected Wind Turbine 2 KW

FREE
SHIPPING
İstaBreeze 2000 Watt 48 Volt Protected Wind Turbine 2 KW
Brand Teknovasyon Arge
47.465,39 TL
Excluding Taxes: 39.554,49 TL
Contribute to reducing Co2 emissions by purchasing this product!

Estimated Delivery: Within 3 days

İstaBreeze 2000 Watt 48 Volt Protected Wind Turbine 2 KW

i-2000 2000W 48V Wind Turbine Wind Protection iSTA-Breeze®

 

Usage area of iSTA Breeze i-2000, 48 Volt 2000 Watt land type wind generator; It is preferred wherever electricity is needed, in chalets and summer houses.

Provides charging current even at low wind speeds.

Wings with an aerodynamic structure have a strong and unbreakable structure.

The newly developed IstaBreeze® WindSafe is a wind generator for long-term professional use, reliably providing energy automatically and unattended, even in difficult conditions.

iSTA Breeze®'s WindSafe wind turbine model has a revolutionary turbine protection system; The rotor supports the entire structure on a movable platform that elevates it by 90 degrees in stormy or very windy weather. Thus the repeller changes with the wind, reducing frontal attack and reducing spin. This protects the turbine from hurricanes or strong winds. This robust construction ensures the long life of the turbines and makes it a unique system in the category of mini wind generators.

The generous sizing of the generator components and the aluminum body of the generator provide heat dissipation thanks to the cooling channels, ensuring long-lasting use even at low ambient temperatures.

CHARGER CONTROLLER IS NOT INCLUDED IN THE PRICE, YOU CAN BUY IT SEPARATELY.

 

THINGS TO BE CONSIDERED FOR CHARGER CONTROLLER CONNECTION!!!

 

one.        Mount the charger close to the battery and in a place that is not hot.

2.        Mount the load resistor horizontally, away from the battery and control device.

3.        First connect the + terminals of the battery and the charger, then the – terminals, then connect the load resistor (resistance) connection to the load outputs and finally connect the 3 phase (ph) inputs coming from the turbine.

4.        Check that the terminal connection screws are tightened well.

5.        Check that the charge controller inverter and battery group are at the same voltage.

6.        To stop the turbine manually, place a switch between the wind turbine and the charge controller that will reduce it to a three-phase short circuit when necessary (63k automat or 3x25 on-off switch).

7.        Be sure to ground the body of the pole.

8.        The length of the pole may be around 6-12 meters.

9.        You can mount the pole tightly with ropes on 3 sides to prevent shaking in the wind.

10.    Do not drill any part of the device while the charger is connected to the system. If you are going to drill for installation, the device must be in the off position.

Support Elements
Weight (including alternator) 25 kg
Power Transmission Slip ring so that bending of the cable is not possible. (pre-mounted on the support element)
Material aluminum casting
Automatic Path Circuit 14 m / s (by tilting the rotor)
WIND TURBINE
SYSTEM VOLTAGE 48 V DC
PRODUCT FEATURES - WIND TURBINE
Current Max 40A
Alternator Body Aluminum
Rated Power 2000w
Generator 3-phase permanent magnet (Strong permanent high efficiency thanks to magnets (NdFeB magnets, 150 ° temperature resistant) (Threading of our copper winding is done only by hand.)
WING SPECIFICATIONS
Weight 650g (1 wing)
Diameter

This product Sent by the seller Teknovasyon Arge.
The price of the product you have examined is determined by the seller.

    

You can go to the My Orders section under your account and cancel your product if it has not been shipped yet.


If your product has been shipped, how to start the easy return process?


    1. Select the product to be returned and the reason for the return. If you have purchased more than one of the same product, you must also select the number of products to be returned.

    2. Contact us at support@azcarbon.com

    3. Take note of the cargo code that will be sent to you in line with the instructions and enter it in the field on your order screen.

    4. Do not forget to send the invoice with the products to be returned.



After the product reaches us, its compliance with the return conditions is checked.


Product If it meets the return conditions, your return will be approved, otherwise it will be sent back to your address.


The refund of your approved order depends on your bank. Your payment will be reflected on your card within 2-10 business days.


Refund for installment purchases will be made at once. It is made to your bank, but it is displayed in installments on the card statements.


After receiving the product, it must be installed by the authorized service. For your orders in the energy efficiency and mobility category of white goods such as refrigerators, washing machines, televisions, solar panels, inverters;


The package should not be opened without the knowledge of the authorized service; if it is opened, the product will be excluded from the scope of return.


If a problem is detected during the authorized service installation, you can only return the product with an authorized service report.