Your Cart

İstaBreeze 500W 12V Wind Turbine İ-500

FREE
SHIPPING
İstaBreeze 500W 12V Wind Turbine İ-500
Brand Teknovasyon Arge
12.847,32 TL
Excluding Taxes: 10.706,10 TL
Contribute to reducing Co2 emissions by purchasing this product!

Estimated Delivery: Within 3 days


İstaBreeze 500W 12V Wind Turbine İ-500

CHARGER CONTROLLER CONNECTION ISSUES TO BE CONSIDERED!!!

one.         INSTALL THE CHARGER IN A PLACE CLOSE TO THE BATTERY AND WHERE IT IS NOT HOT.

2.         INSTALL THE LOAD RESISTANCE HORIZONTALLY AWAY FROM THE BATTERY AND CONTROL DEVICE.

3.         FIRST CONNECT THE + TERMINALS OF THE BATTERY AND THE CHARGER, THEN THE – TERMINALS, THEN CONNECT THE LOAD RESISTANCE TO THE LOOD OUTPUTS, AND LAST CONNECT THE 3 PHASE COMING FROM THE TURBINE TO THE (PH) INPUTS.

4.         CHECK THAT THE TERMINAL CONNECTION SCREWS ARE TIGHTENED WELL.

5.         CHECK THAT THE CHARGER CONTROLLER, INVERTER AND BATTERY GROUP ARE THE SAME VOLTAGE.

6.         TO STOP THE TURBINE MANUALLY, PUT A SWITCH BETWEEN THE WIND TURBINE AND THE CHARGER CONTROLLER THAT WILL TURN IT TO A THREE PHASE SHORT CIRCUIT IF NECESSARY (63 K AUTOMAT OR 3X25 ON-OFF PAKO).

7.         MAKE SURE TO GROUND THE BODY OF THE POLE.

8.         THE LENGTH OF THE POLE MAY BE AROUND 6-12 METERS.

9.         YOU CAN MOUNT THE POLE TIGHTLY WITH ROPE FROM 3 SIDES AGAINST SHAKING IN THE WIND.

10.     DO NOT DRILL ANY PART OF THE DEVICE WITH A DRILL WHILE THE CHARGER IS CONNECTED TO THE SYSTEM. IF YOU ARE GOING TO DRILL FOR INSTALLATION, THE DEVICE MUST BE IN OFF POSITION.

İ-500 12V Wind Turbine İSTA-BREEZE

As a result of our continuous improvement process, we are pleased to introduce the new wind generator i-500 plus. The newly developed IstaBreeze® i-500 plus is a wind generator for professional use that automatically provides reliable energy even in harsh conditions with our newly developed smart hybrid charge controller. The heat dissipation of the generator components over the newly developed aluminum alternator ensures a low thermal load ensuring long-lasting use even at high ambient temperatures. The generator shaft operates with two encapsulated and permanently lubricated deep groove ball bearings made of stainless steel. In the front bearing, a special frictionless sealing disc prevents the ingress of moisture and dust. Our product is made of aluminum, stainless and composite materials, so there is no rust problem and it can be used safely in all places.

PRODUCT FEATURES - WIND TURBINE
Alternator Body ALUMINUM
PRODUCT FEATURES
WEIGHT 5kg
DECIBEL 40dB
DIRECT NO
BODY MATERIAL COMPOSITE
WIND SPEED
INITIAL WIND SPEED 2m/S
OPTIMAL WIND SPEED 17-20m/s
STRENGTH
AMPERE 40amp
MAXIMUM POWER 450W
AVERAGE POWER 400W
VOLTAGE 12V-AC
WING FEATURES
WEIGHT 180g
WIDTH 13cm(4.6inc)
MATERIAL COMPOSITE
ROTOR DIAMETER 103cm
LENGTH 50cm
PACKAGE INCLUDED
CONNECTION SCREWS 1 set
NOSE 1 piece
FLANGE 1 piece
BODY 1 piece
WINGS 3 pieces
User guide 1 piece
REQUIRED EQUIPMENT

This product Sent by the seller Teknovasyon Arge.
The price of the product you have examined is determined by the seller.

    

You can go to the My Orders section under your account and cancel your product if it has not been shipped yet.


If your product has been shipped, how to start the easy return process?


    1. Select the product to be returned and the reason for the return. If you have purchased more than one of the same product, you must also select the number of products to be returned.

    2. Contact us at support@azcarbon.com

    3. Take note of the cargo code that will be sent to you in line with the instructions and enter it in the field on your order screen.

    4. Do not forget to send the invoice with the products to be returned.



After the product reaches us, its compliance with the return conditions is checked.


Product If it meets the return conditions, your return will be approved, otherwise it will be sent back to your address.


The refund of your approved order depends on your bank. Your payment will be reflected on your card within 2-10 business days.


Refund for installment purchases will be made at once. It is made to your bank, but it is displayed in installments on the card statements.


After receiving the product, it must be installed by the authorized service. For your orders in the energy efficiency and mobility category of white goods such as refrigerators, washing machines, televisions, solar panels, inverters;


The package should not be opened without the knowledge of the authorized service; if it is opened, the product will be excluded from the scope of return.


If a problem is detected during the authorized service installation, you can only return the product with an authorized service report.