Solar A Energy Victron Energy Inverter/Charger 5000VA PMP482505010
Model No: MultiPlus-II 48/5000/70-50
New inverter/charger
MultiPlus-II combines the features of MultiPlus and MultiGrid.
It has all the features of the MultiPlus, plus an external current converter option for PowerControl and PowerAssist applications and for optimizing self-consumption with an external current sensor (max. 32 A).
It also has all the features of MultiGrid, with built-in anti-islanding and a growing list of approvals from many countries.
Note: For a short time in the past, this product was called MultiGrid-II.
Models:
3000VA - 5000VA - 8000VA - 10000VA - 15000VA
PowerAssist
The MultiPlus-II prevents overloading of a limited AC source such as a generator or shore power connection. First, it automatically de-charges the battery during conditions that would otherwise cause overload. The second level boosts the output of a generator or shore-side supply with power from the battery.
ESS: Energy Storage Systems
The MultiPlus-II is a key component of a Victron ESS system and offers the flexibility to be combined with units such as MPPT Solar Chargers or Grid Tie PV Inverters. See the ESS manual for examples and more information.
Uninterruptible AC power (UPS function)
In the event of a grid failure or shore or generator power outage, the inverter inside the Multi automatically kicks in and transfers the supply to the connected loads. This process is done so quickly (less than 20 milliseconds) that your computers and other electronic equipment continue to operate without interruption. .
A MultiPlus and ESS (Energy Storage System) functionality
The MultiPlus-II offers all the MultiPlus features plus the PowerControl and PowerAssist functionality, extending the 50A to 100A
is a multifunctional inverter/charger with a current sensor option.
The MultiPlus-II is suitable for professional marine, yachting, vehicle applications and off-grid applications on land.
It also has built-in anti-islanding functionality and a long list of increasingly popular country approvals for ESS application.
Various system configurations are possible. Refer to the ESS Design and configuration guide for detailed information.
PowerControl and PowerAssist - Increasing grid or generator power capacity
The maximum grid or generator current value can be set. The MultiPlus-II takes into account other AC loads,
It uses all available additional energy for charging and prevents overloading of the generator or the grid (PowerControl function).
PowerAssist takes the PowerControl principle to a further level. Peak power is often only required for a limited time.
In such cases, the MultiPlus-II compensates for insufficient generator, shore or grid power with power from the battery. When the load decreases, the battery
Backup power is used for recharging.
Solar power: AC power available even during grid failure
MultiPlus-II can be used in grid-connected PV and other alternative energy systems, without being connected to the grid. Both solar
Compatible with both powered charger controllers and grid-tie inverters.
Two AC Outlets
The main power output has an uninterruptible function. In the event of a grid failure or when the shore/generator power connection is lost,
The MultiPlus-II transfers the energy supply to the connected loads. This process is done so quickly (less than 20 milliseconds) that
your computers and other electronic equipment continue to operate without interruption.
The second power output only works when AC is present at the MultiPlus-II power input. Loads that will not discharge the battery, such as a water heater, are not
can be connected to the power outlet.
Virtually unlimited power thanks to parallel (not for 8k, 10k and 15k models) and three-phase operation
Up to six units of Multi can operate in parallel to provide higher power output. For example, six 48/5000/70
The unit provides an output power of 25 kW / 30 kVA with a charging capacity of 420 Amps.
In addition to parallel connection, three units of the same model can be configured for three-phase output. And that's not all: Three
Six sets connected to the unit can be paralleled to provide a 75 kW / 90 kVA inverter and a charging capacity of over 1200 Amps.
On-site system configuration, monitoring and control capability
Settings can be changed in just minutes with VEConfigure software (desktop or laptop and MK3-USB
interface is required).
Various monitoring and control options available: Color Control GX, Venus GX, Octo GX, CANvu GX, laptop,
desktop computer, Bluetooth (with optional VE.Bus Smart dongle), Battery Monitor, Digital Multi-Control Panel.
Remote configuration and monitoring
Plug in Control GX or other GX product to connect to the Internet.
Process data can be stored and viewed free of charge on our VRM (Victron Remote Management) website.
When you connect to the Internet, you can access systems remotely and make changes to settings.
This Ad is Listed with ENTEGRA Integration Systems
This product Sent by the seller Solar A Enerji.
The price of the product you have examined is determined by the seller.