Your Cart

Solar A Energy Victron Energy Inverter/charger 5000va, Qua125020000, Victron

FREE
SHIPPING
Solar A Energy Victron Energy Inverter/charger 5000va, Qua125020000, Victron
Brand Diğer
150.455,75 TL
131.648,79 TL
Excluding Taxes: 109.707,33 TL
Contribute to reducing Co2 emissions by purchasing this product!

Estimated Delivery: Within 2 days

Solar A Enerji Victron Energy Inverter/Charger 5000VA, QUA125020000, Victron

Model No: Quattro 12/5000/220-100/100

New inverter/charger
MultiPlus-II combines the features of MultiPlus and MultiGrid.
It has all the features of the MultiPlus, plus an external current converter option for PowerControl and PowerAssist applications and for optimizing self-consumption with an external current sensor (max. 32 A).
It also has all the features of MultiGrid, with built-in anti-islanding and a growing list of approvals from many countries.
Note: For a short time in the past, this product was called MultiGrid-II.
Models:
3000VA - 5000VA - 8000VA - 10000VA - 15000VA
PowerAssist
The MultiPlus-II prevents overloading of a limited AC source such as a generator or shore power connection. First, it automatically de-charges the battery during conditions that would otherwise cause overload. The second level boosts the output of a generator or shore-side supply with power from the battery.
ESS: Energy Storage Systems
The MultiPlus-II is a key component of a Victron ESS system and offers the flexibility to be combined with units such as MPPT Solar Chargers or Grid Tie PV Inverters. See the ESS manual for examples and more information.
Uninterruptible AC power (UPS function)
In the event of a grid failure or shore or generator power outage, the inverter inside the Multi automatically kicks in and transfers the supply to the connected loads. This process is done so quickly (less than 20 milliseconds) that your computers and other electronic equipment continue to operate without interruption. .
A MultiPlus and ESS (Energy Storage System) functionality
The MultiPlus-II offers all the MultiPlus features plus the PowerControl and PowerAssist functionality, extending the 50A to 100A
is a multifunctional inverter/charger with a current sensor option.
The MultiPlus-II is suitable for professional marine, yachting, vehicle applications and off-grid applications on land.
It also has built-in anti-islanding functionality and a long list of increasingly popular country approvals for ESS application.
Various system configurations are possible. Refer to the ESS Design and configuration guide for detailed information.
PowerControl and PowerAssist - Increasing grid or generator power capacity
The maximum grid or generator current value can be set. The MultiPlus-II takes into account other AC loads,
It uses all available additional energy for charging and prevents overloading of the generator or the grid (PowerControl function).
PowerAssist takes the PowerControl principle to a further level. Peak power is often only required for a limited time.
In such cases, the MultiPlus-II compensates for insufficient generator, shore or grid power with power from the battery. When the load decreases, the battery
Backup power is used for recharging.
Solar power: AC power available even during grid failure
MultiPlus-II can be used in grid-connected PV and other alternative energy systems, without being connected to the grid. Both solar
Compatible with both powered charger controllers and grid-tie inverters.
Two AC Outlets
The main power output has an uninterruptible function. In the event of a grid failure or when the shore/generator power connection is lost,
The MultiPlus-II transfers the energy supply to the connected loads. This process is done so quickly (less than 20 milliseconds) that
your computers and other electronic equipment continue to operate without interruption.
The second power output only works when AC is present at the MultiPlus-II power input. Loads that will not discharge the battery, such as a water heater, are not
can be connected to the power outlet.
Virtually unlimited power thanks to parallel (not for 8k, 10k and 15k models) and three-phase operation
Up to six units of Multi can operate in parallel to provide higher power output. For example, six 48/5000/70
The unit provides an output power of 25 kW / 30 kVA with a charging capacity of 420 Amps.
In addition to parallel connection, three units of the same model can be configured for three-phase output. And that's not all: Three
Six sets connected to the unit can be paralleled to provide a 75 kW / 90 kVA inverter and a charging capacity of over 1200 Amps.
On-site system configuration, monitoring and control capability
Settings can be changed in just minutes with VEConfigure software (desktop or laptop and MK3-USB
interface is required).
Various monitoring and control options available: Color Control GX, Venus GX, Octo GX, CANvu GX, laptop,
desktop computer, Bluetooth (with optional VE.Bus Smart dongle), Battery Monitor, Digital Multi-Control Panel.
Remote configuration and monitoring
Plug in Control GX or other GX product to connect to the Internet.
Process data can be stored and viewed free of charge on our VRM (Victron Remote Management) website.
When you connect to the Internet, you can access systems remotely and make changes to settings.
Two AC outlets
The main output has a no-cut function. In the event of a mains failure or when the shore/generator power connection is interrupted.
Quattro takes over the power supply of the connected loads. This process is done so quickly (less than 20 milliseconds) that your computers
and your other electronic equipment continues to operate without interruption.
The second power output only works when AC is present at one of the Quattro power inputs. Like a kettle, it charges the battery.
Loads that will not be discharged can be connected to this power output.
Split phase option
We have configured our autotransformer (see
datasheet at www.victronenergy.com ) to provide 240 V / 60 Hz.
A split-phase AC source can be obtained by connecting it to a programmed “European type” inverter.
Three phase capacity
Three units can be configured for three-phase output. And that's not all: 4 sets connected to three 15 kVA units, 144 kW / 180 kVA
can be connected in parallel to provide inverter power and 2400 A charging capacity.
PowerControl - Coping with limited generator, shore side or grid power
The Quattro is a very powerful battery charger, so it draws a lot of current from the generator or shore side source (at 230VAC
16A per 5kVA Quattro). A current limit can be set for each AC input. The Quattro also takes into account other AC loads.
By keeping the battery in stock, it uses all the excess available for charging and prevents overloading of the generator or grid supply.
PowerAssist – Boosts shore or generator power
This feature takes the operating principle of PowerControl to a further level, enabling the Quattro to use alternative source capacity.
In situations where peak power is often only required for a limited time, the Quattro supports insufficient mains or
generator power is immediately compensated by the power from the battery. When the load decreases, the spare battery is used to recharge the battery.
power is used.
Solar power: AC power available even during grid failure
Quattro can be used in grid-connected PV and other alternative energy systems without being connected to the grid.
Network loss detection software is available.
System configuration
- In case of stand-alone application, if the settings need to be changed, this is a selector switch setting
procedure can be done in minutes.
- Parallel and three-phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software.
can be done.
- With Assistants (software for specific applications), grid-tied inverters and/or MPPT Solar Chargers
Configure off-grid, grid-interactive and self-consumption applications involving your devices
can be done.
On-site Monitoring and control
Various options available: Battery Monitor, Multi Control Panel, Color Control GX and other GX devices, smartphone
or tablet (Bluetooth Smart), laptop or PC (USB or RS232).
Remote Monitoring and control
Color Control GX and other GX devices.
Data can be stored and viewed free of charge on our VRM (Victron Remote Management) website.
Remote configuration
When connected to Ethernet, systems with a Color Control GX and other GX devices can be accessed and settings can be changed.



This Ad is Listed with ENTEGRA Integration Systems

This product Sent by the seller Solar A Enerji.
The price of the product you have examined is determined by the seller.

    

You can go to the My Orders section under your account and cancel your product if it has not been shipped yet.


If your product has been shipped, how to start the easy return process?


    1. Select the product to be returned and the reason for the return. If you have purchased more than one of the same product, you must also select the number of products to be returned.

    2. Contact us at support@azcarbon.com

    3. Take note of the cargo code that will be sent to you in line with the instructions and enter it in the field on your order screen.

    4. Do not forget to send the invoice with the products to be returned.



After the product reaches us, its compliance with the return conditions is checked.


Product If it meets the return conditions, your return will be approved, otherwise it will be sent back to your address.


The refund of your approved order depends on your bank. Your payment will be reflected on your card within 2-10 business days.


Refund for installment purchases will be made at once. It is made to your bank, but it is displayed in installments on the card statements.


After receiving the product, it must be installed by the authorized service. For your orders in the energy efficiency and mobility category of white goods such as refrigerators, washing machines, televisions, solar panels, inverters;


The package should not be opened without the knowledge of the authorized service; if it is opened, the product will be excluded from the scope of return.


If a problem is detected during the authorized service installation, you can only return the product with an authorized service report.