Victron DC-DC 12/24V 400A Battery Combiner, CYR010400000

12/24V 400A Battery Combiner, CYR010230010, Victron

Model No: Cyrix-i 12/24V-400A intelligent combiner

New: Intelligent battery monitoring to prevent unwanted migrations

Some battery combiners disconnect the battery in the event of a short but high amperage load. A battery combiner

It may also fail to connect a large but discharged battery pack as the DC voltage drops just below it.

cut-out value when batteries are connected.

Cyrix's software does more than simply connect and disconnect based on battery voltage.

fixed time delay. Cyrix-i looks at the general trend (voltage increase or decrease) and reverses the previous situation

Take action only if the trend reverses within a certain period of time. Time delay depends on voltage

deviation from trend.

Additionally, four key timing profiles can be selected (see overleaf).

12/24V and 24/48V auto range

Cyrix-i automatically detects system voltage.

No voltage loss

Cyrix battery combiners are an excellent alternative to diode isolators. Its main feature is that it is virtually there.

Since there is no voltage loss, there is no need to increase the output voltage of alternators or battery chargers.

Prioritizing the starter battery

In a typical installation, the alternator is connected directly to the starter battery. Accessory battery and possibly

Additionally, a bow thruster and each of the other batteries are connected to the starter battery via Cyrix battery couplers.

When the Cyrix detects that the starter battery has reached connection voltage it will step in to allow parallel connection.

charging other batteries.

Bi-directional voltage detection and power supply from both batteries

Cyrix detects the voltage of both connected batteries. Therefore, it will also come into play in the following situations, for example:

The accessory battery is being charged by a battery charger.

Cyrix has a dual power supply. Therefore, it will also shut down if the voltage on a battery is too low to start.

Cyrix.

To prevent unexpected operation during installation or when a battery is disconnected,

Cyrix-i will not shut down if the voltage at either battery connection is less than 2 V (12 V battery) or less than 4 V.

(24V battery) or 8V (48V battery).

Parallel connection in emergency situations

Cyrix can also be armed with a push button (Cyrix remains armed for 30 seconds) or a switch to connect.

connect the batteries in parallel manually.

This is especially useful in emergency situations where the starter battery is discharged or damaged.

This product Sent by the seller Yapıbahçe.
The price of the product you have examined is determined by the seller.